QUANT PRO 1200 Studio Flash
The QUANT pro flash lamps series as a continuation of QUANT serie is intended for demanding photographers. Lamps are equipped with power modeling light and built in fan cooling system. Integrated module of new type of flash tube and halogen bulb is shielded by a frosted glass cap. That is why perfect balanse of proportion between modeling and flash light can be obtained. It is because both shielded elements shine equally for sake of optical construction. It is relevant when some accessories are applied ex. Reflectors, honeycombs, snoots. Flash tube is extremally pulled out of the front it allows the most of light in softboxes.
QUANT Pro is a microprocessor controlled flash lamp for professional purposses.The flash energy can be set over a range of 5 f-stopa with the high accuracy of 1/10 f-stop. There is an internal system of energy dumping when the energy level is reduced. When the setting is reduced from its maximum to its minimum value, the dumping duration is shoter than 10 s. There is an advances system of modeling lighting, with seven modes of operation, including "proportional to flash energy" mode. Modelling lamps up to 650W . The lamps can be synchronized by the built-in photocell or external synchro-cord. The pohotocell can be made to respond toa second flash. It is particularly useful when use a digital camera whit so-called "pre-flash" only, without synchro-socket. The lamps are provided with optical and sound signalling of readiness for triggering. A digital display shows the relative values of lamp energy. The display can be turned upside down, to help reading the energy value when the lamp hangs on a phantograph in diffrent position. The settings can be locked to avoid accidental changes. Colour temperature 5400 K. Power supply is in the range of 170-240 V, 50 Hz. The QUANT Pro flash lamps may be controlled by means of an external control panel called QUANT RC. When it is linked up, it instantly takes over all lamp functions. Thr RC cord that connect it to the lamp is 10 m long as supplied.
- Power: 1200 W/s
- Color Temperature: 5400 K
- F-stop: ISO 100, 1m, reflector 60 degrees: 90.1
- Recycling time (sec): 0.9-2.8s
- Flash duration 0,5t sec: 1/400s
- Proportoinal modelling light: 300/650W
- Control range energy: 5 f-stop in 0,1 f-stop steps
- Flash triggering: Synchro cord, IR, Photocell, first or second flash
- Voltage across synch cord: 12DC(V)
- Flash power stability: +/- 1%
- Power supply: 170-240V fan-cooled
- Dimensions (cm): 12 x 12 x 45
- Weight: 4.65 kg
In Box – monoblock flash with flash tube and modeling 650W lamp, safety glass cap, cable 220V, warranty card, manual in Bulgarian or English.